Volume 5, Issue 1, March 2020, Page: 1-6
Crystal Structure Imperfection of LiFePO4 Synthesized Through Solid-state Reaction: An XRD Overview
Ibrahim Purawiardi, Research Centre for Metallurgy and Materials, Indonesian Institute of Sciences (LIPI), South Tangerang, Indonesia
Christin Rina Ratri, Research Centre for Physics, Indonesian Institute of Sciences (LIPI), South Tangerang, Indonesia
Received: Mar. 5, 2020;       Accepted: Mar. 19, 2020;       Published: Mar. 31, 2020
DOI: 10.11648/j.ijmpem.20200501.11      View  467      Downloads  129
Abstract
Solid-state reaction is one of some methods to synthesize LiFePO4 powder. However, the post-synthesis crystal structure was found to be imperfect, probably caused by the imperfection of the phospho-olivine structure. This study aimed to investigate the cause of its imperfection. A LiFePO4 powder synthesized via solid-state reaction path was used as a case study sample for this study. XRD characterization was done to investigate it. Orthorhombic crystal structure was found to be a perfect fit for this sample using precise lattice parameter analysis, as shown by the linear regression equation result. Further analysis was performed using Rietveld refinement method to pinpoint the actual coordinates of Li, Fe, P, and O atoms. The result shows that solid-state reaction can produce an order of orthorhombic crystal structure which constructed by ordered Li atoms arrangement. On the other hands, there is a disordered phospho-olivine structure due to the imperfection of the occupation of Fe, P, and O atoms. These disorders were found through analysis of anomalous peaks on the Rietveld refinement result when compared with PDF database. Loss of (200) plane was caused by imperfect occupation of O atoms, while imperfect occupation of Fe and P atoms leads to new (200) plane of FeP4 phase which has a monoclinic crystal structure.
Keywords
LiFePO4, Imperfection, Synthesis, Solid-state, Calcination, XRD
To cite this article
Ibrahim Purawiardi, Christin Rina Ratri, Crystal Structure Imperfection of LiFePO4 Synthesized Through Solid-state Reaction: An XRD Overview, International Journal of Mineral Processing and Extractive Metallurgy. Vol. 5, No. 1, 2020, pp. 1-6. doi: 10.11648/j.ijmpem.20200501.11
Copyright
Copyright © 2020 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
N. D. Rago, J. Li, Y. Sheng, D. L. Wood, L. A. Steele, J. Lamb, C. Grosso, K. Fenton, I. Bloom. “Effect of Binder on the Overcharge Response in LiFePO4-containing Cells,” Journal of Power Sources, vol. 450, pp. 227595, Feb. 2020. DOI: 10.1016/j.jpowsour.2019.227595.
[2]
Q. Liang, H. Yue, S. Wang, S. Yang, K. H. Lam, X. Hou. “Recycling and Crystal Regeneration of Commercial Used LiFePO4 Cathode Materials,” Electrochimica Acta, vol. 330, pp. 135323, Jan. 2020. DOI: 10.1016/j.electacta.2019.135323.
[3]
X. Si, M. Li, X. Fu. “An Improved Method to Prepare FePO4 by Introduction of Na3PO4 and its Usage for Fabricating LiFePO4,” Journal of Wuhan University of Technology - Mater. Sci. Ed., vol. 34 (5), pp. 1097-1102, Oct. 2019. DOI: 10.1007/s11595-019-2165-0.
[4]
A. Kulka, K. Redel, J. Molenda. “Platelet-shape LiFePO4/Fe2P/C Composite Material as a High-rate Positive Electrode for Li-ion Batteries,” Solid State Ionics, vol. 335, pp. 113-120, Jul. 2019. DOI: 10.1016/j.ssi.2019.03.004.
[5]
J. Li, J. Wu, Y. Li, H. Zhao, T. Zhao, S. Ma, H. Liu. “Facile Strategies to Utilize FeSO4.7H2O Waste Slag for LiFePO4/C Cathode with High Performances,” vol. 99, pp. 74-81, Jun. 2019. DOI: 10.1016/j.jtic019.03.002.
[6]
Y. Meng, Y. Li, J. Xia, Q. Hu, X. Ke, G. Ren, F. Zhu. “F-doped LiFePO4@N/B/F-doped Carbon as High Performance Cathode Materials for Li-ion Batteries,” Applied Surface Science, vol. 476, pp. 761-768, May 2019. DOI: 10.1016/j.apsusc.2019.01.139.
[7]
L. He, W. Zha, D. Chen. “Fabrication and Electrochemical Properties of 3D Nano-network LiFePO4@Multiwalled Carbon Nanotube Composite Using Risedronic Acid as the Phosphorus Source,” Progress in Natural Science: Materials International, vol. 29 (2), pp. 156-162, Apr. 2019. DOI: 10.1016/j.pnsc.2019.02.005.
[8]
S. X. Wu, C. L. Chiang, C. C. Wang, C. Y. Chen. “Functionalization of MWCNTs by Plasma Treatment and Use as Conductive Additives for LiFePO4 Electrode,” Journal of the Taiwan Institute of Chemical Engineers, vol. 89, pp. 208-214, Aug. 2018. DOI: 10.1016/j.jtice.2018.04.026.
[9]
G. Han, S. Yang, J. Liu, Y. Huang. “The Investigation of Humics as a Binder for LiFePO4 Cathode in Lithium Ion Battery,” TMS 2018: Characterization of Minerals, Metals, and Materials 2018, pp. 31-39, Jan. 2018. DOI: 10.1007/978-3-319-72484-3_4.
[10]
M. Talebi-Esfandarani, S. Rousselot, M. Gauthier, P. Sauriol, M. Duttine, A. Wattiaux, Y. Liu, A. X. Sun, G. Liang, M. Dollé. “Control of the LiFePO4 Electrochemical Properties Using Low-cost Iron Precursor in a Melt Process,” Journal of Solid State Electrochemistry, vol. 20 (12), pp. 3481-3490, Dec. 2016. DOI: 10.1007/s10008-016-3324-2.
[11]
M. Piana, M. Arrabito, S. Bodoardo, A. D’Epifanio, D. Satolli, F. Croce, B. Scrosati. “Characterization of Phospho-olivines as Materials for Li-ion Cell Cathodes,” Ionics, vol. 8, pp. 17-26, 2002. DOI: 10.1007/BF02377749.
[12]
H. Yen, R. Rohan, C. Y. Chiou, C. J. Hsieh, S. Bolloju, C. C. Li, Y. F. Yang, C. W. Ong, J. T. Lee. “Hierarchy Concomitant in situ Stable Iron (II)-carbon Source Manipulation Using Ferrocenecarboxylic Acid for Hydrothermal Synthesis of LiFePO4 as High-capacity Battery Cathode,” Electrochimica Acta, vol. 253 (1), pp. 227-238, Nov. 2017. DOI: 10.1016/j.electacta.2017.09.065.
[13]
E. Golestani, M. Javanbakht, H. Ghafarian-Zahmatkesh, H. Beydaghi, M. Ghaemi. “Tartaric Acid Assisted Carbonization of LiFePO4 Synthesized Through in Situ Hydrothermal Process in Acqueous Glycerol Solution,” Electrochimica Acta, vol. 259 (1), pp. 903-915, Jan. 2018. DOI: 10.1016/j.electacta.2017.10.123.
[14]
R. Martins, R. Gonçalves, C. M. Costa, S. Ferdov, S. Lanceros-Méndez. “Mild Hydrothermal Synthesis and Crystal Morphology Control of LiFePO4 by Lithium Nitrate,” Nano-Structures and Nano-Objects, vol. 11, pp. 82-87, Jul. 2017. DOI: 10.1016/j.nanoso.2017.07.001.
[15]
G. Wu, N. Liu, X. Gao, X. Tian, Y. Zhu, Y. Zhou, Q. Zhu. “A Hydrothermally Synthesized LiFePO4/C Composite with Superior Low-temperature Performance and Cycle Life,” Applied Surface Science, vol. 435, pp. 1329-1336, Mar. 2018. DOI: 10.1016/j.apsusc.2017.11.276.
[16]
W. Zhou, C. Liu, Z. Wen, J. Xu, T. Han, G. Li, D. Huang, X. Liang, Z. Lan, H. Ning, H. Huang, J. Guo. “Effects of Defect Chemistry and Kinetic Behavior on Electrochemical Properties for Hydrothermal Synthesis of LiFePO4/C Cathode Materials,” Materials Chemistry and Physics, vol. 227, pp. 56-63, Apr. 2019. DOI: 10.1016/j.matchemphys.2019.01.050.
[17]
Y. Zhang, P. Xin, Q. Yao. “Electrochemical Performance of LiFePO4/C Synthesized by Sol-gel Method as Cathode for Aqueous Lithium Ion Batteries,” Journal of Alloys and Compounds, vol. 741, pp. 404-408, Apr. 2018. DOI: 10.1016/j.allcom.2018.01.083.
[18]
M. Singh, B. Singh, M. Willert-Porada. “Reaction Mechanism and Morphology of the LiFePO4 Materials Synthesized by Chemical Solution Deposition and Solid-state Reaction," Journal of Electroanalytical Chemistry, vol. 790, pp. 11-19, Apr. 2017. DOI: 10.1016/ j.jelechem.2017.02.043.
[19]
A. Lutts. “A New Method for Determining the Lattice Parameters from Powder Patterns of Orthorhombic Crystals,” Zeitschrift für Kristallographie, vol. 161 (3-4), pp. 195-207, Apr. 1982. DOI: 10.1524/zkri.1982.161.3-4.195.
[20]
J. B. Nelson, D. P. Riley. “An Experimental Investigation of Extrapolation Methods in the Derivation of Accurate Unit-cell Dimensions of Crystals,” Proc. Phys. Soc., vol. 57, pp. 160-177, 1945. DOI: 10.1088/0959-5309/57/3/302.
[21]
H. M. Rietveld. “A Profile Refinement Method for Nuclear and Magnetic Structures,” Journal of Applied Crystallography, vol. 2, pp. 65-71, 1969. DOI: 10.1107/S0021889869006558.
Browse journals by subject