Volume 4, Issue 1, March 2019, Page: 1-6
Research on FeO Content of Sinter
Hu Qichen, Iron and Steel Research Institute of HBIS Group, Shijiazhuang, P. R. China
Wu Chunliang, Research Institute for Hebei Vanadium Titanium Industry Technology, Chengde, P. R. China
Sun Jianghuan, Iron and Steel Research Institute of HBIS Group, Shijiazhuang, P. R. China
Wang Na, Research Institute for Hebei Vanadium Titanium Industry Technology, Chengde, P. R. China
Hu Binsheng, School of Metallurgical and Energy, Hebei United University, Tangshan, P. R. China
Received: Dec. 11, 2018;       Accepted: Jan. 2, 2019;       Published: Feb. 15, 2019
DOI: 10.11648/j.ijmpem.20190401.11      View  263      Downloads  72
Abstract
The FeO content of sinter is the key role for sinter quality, carbon consumption and production cost. And it has great effect on production status, fuel ratio and hot metal output of blast furnace. According to the relevant national standards and industry standards, the particle size, reducibility, drum strength, fuel ratio of sinter and BF production status in Tangsteel iron-making plant were analyzed in this paper. It is found that the optimal range of FeO content in Tangsteel is from 8.0 to 8.5 wt. %.
Keywords
Sinter, FeO, Drum Strength, Fuel Ratio
To cite this article
Hu Qichen, Wu Chunliang, Sun Jianghuan, Wang Na, Hu Binsheng, Research on FeO Content of Sinter, International Journal of Mineral Processing and Extractive Metallurgy. Vol. 4, No. 1, 2019, pp. 1-6. doi: 10.11648/j.ijmpem.20190401.11
Copyright
Copyright © 2019 Authors retain the copyright of this article.
This article is an open access article distributed under the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0/) which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
Reference
[1]
Seah M P, Hordros E. Grain Boundary Segregation [J]. Proy. Roy. Soc. 1973, (335): 191-212.
[2]
Liu zhulin. Study on influencing factors of FeO content in sinter [J]. Journal of chongqing institute of technology, 2005, 7 (1): 8-13.
[3]
Mu jiyao. Soft melting properties of high alkalinity sinter [J]. Sintered pellets, 1986, (6): 17-23.
[4]
Wang changqiu, wukeng, houenjian, etc. Study on sintering carbon distribution and mineral distribution of thick material layer in east burning plant of anshan iron & steel [J]. Journal of steel research, 2010, (6) : 14-17.
[5]
Nachtrab W T, Chou Y T. High Temperature Ductility Loss incarb-manganese and niobium-treated Steel [J]. Metall. Trans. A, 1986, 17A (11): 1995-2006.
[6]
Yin DE, li qiumei. Research and production practice of influencing factors of sinter FeO [J]. Sinter pellets, 1999 (5) : 31-33.
[7]
Dai shuping, zhoulei. Effect of FeO content on mineral composition and microstructure of sinter [J]. Metal world, 2011, (6): 32-34.
[8]
Huang yijun. Relationship between sinter FeO content and sinter production and quality [J]. Sinter pellets, 1980, (1) : 17-26.
[9]
Cheng zhenxian. Several questions about FeO in the sinter [J]. Sintered pellets.1983, (3): 33-38.
[10]
Shan jiguo. Study on low temperature reduction degradation of sinter [J]. Sintered pellets, 1989, (2) : 15-18.
[11]
Zhang ling. Reduction of FeO content in sinter to improve metallurgical properties of sinter [J]. Jiangsu metallurgy, 1998, (3): 32-33.
Browse journals by subject